 |
| Quantity: | |
|---|---|
Device Parameters
Num. | Name | Specifications/Model | Remark |
01 | Vacuum chamber size | 500×460×110mm | |
02 | Sealing width | 8-10mm | |
03 | Sealing line spacing | 400mm | |
04 | Power supply | 380V (220V) 50Hz | |
05 | Packing capacity | 2-3 times/min | |
06 | Power | 0.8KW | |
07 | Sealing length | 400mm×2 strips | |
08 | Dimensions | 520×515×900mm |
Product configuration
Equipped with a special type 20 vacuum pump, controlled by a time relay, made of 304 stainless steel, the worktable and vacuum chamber are made of 3mm thick stainless steel plate, and the two-way valve is used to control the down-pumping method, with an oil-water separation device, and the vacuum tube and gasket are made of silicone.
Product Features
DZ-400/2S vacuum packaging machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. Components and other solids, powders, and liquids are vacuum-packed.
Working principle
First close the top cover of the equipment, the vacuum pump starts to pump out air from the vacuum chamber, when the set pumping time is reached, the vacuum pump stops working, then the pressure valve opens automatically, the air bag is inflated, the air bag support plate, phenolic board, heating strip Press down the seal as a whole and heat the heating strip at the same time. When the packaging bag is fully sealed, the heating strip stops heating and is in a continuous cooling state.
Device Parameters
Num. | Name | Specifications/Model | Remark |
01 | Vacuum chamber size | 500×460×110mm | |
02 | Sealing width | 8-10mm | |
03 | Sealing line spacing | 400mm | |
04 | Power supply | 380V (220V) 50Hz | |
05 | Packing capacity | 2-3 times/min | |
06 | Power | 0.8KW | |
07 | Sealing length | 400mm×2 strips | |
08 | Dimensions | 520×515×900mm |
Product configuration
Equipped with a special type 20 vacuum pump, controlled by a time relay, made of 304 stainless steel, the worktable and vacuum chamber are made of 3mm thick stainless steel plate, and the two-way valve is used to control the down-pumping method, with an oil-water separation device, and the vacuum tube and gasket are made of silicone.
Product Features
DZ-400/2S vacuum packaging machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. Components and other solids, powders, and liquids are vacuum-packed.
Working principle
First close the top cover of the equipment, the vacuum pump starts to pump out air from the vacuum chamber, when the set pumping time is reached, the vacuum pump stops working, then the pressure valve opens automatically, the air bag is inflated, the air bag support plate, phenolic board, heating strip Press down the seal as a whole and heat the heating strip at the same time. When the packaging bag is fully sealed, the heating strip stops heating and is in a continuous cooling state.
